On Orders Over £40
Laser
Power-Tec T Bolt for Robo Sill Clamps 91525
Laser1.0 / 5.0
0 Review
T Bolt for Robo Sill Clamps.T-Bolt.Spare part.Spare part for AutoRobot Sill clamps.Alignment.Body repair.
Power-Tec Tec-Spot Kit 91975
Laser1.0 / 5.0
0 Review
This stud welder with slide hammer is used to weld on panel pulling pins, washers and squiggly wire, allowing for the fast and effective removal of...
View full detailsPower-Tec Tec-Spot Squiggly Earth 91323
Laser1.0 / 5.0
0 Review
Use with Tec-Spot Welders to weld on squiggly wire to damaged panels.Earth collar.Used to convert Tec Spot type welders for Squiggly Wire.Ideal for...
View full detailsPower-Tec Tec-Spot Squiggly Electrode 91324
Laser1.0 / 5.0
0 Review
Use with Tec-Spot Welders to weld on squiggly wire to damaged panels.Copper screw electrode.Used to convert Tec Spot type welders for Squiggly Wire...
View full detailsPower-Tec Temperature Stick 125C 91355
Laser1.0 / 5.0
0 Review
Swipe the temperature across the surface and when it melts, you get an instant, accurate indication that the rated temperature is achievedStick ins...
View full detailsPower-Tec Threaded Pulling Loop 5pc 91628
Laser1.0 / 5.0
0 Review
To be used together with a threaded pull stud in preparation of a dent repair on an aluminium panel.Thread puller loop.Pack of 5.Screw to threaded ...
View full detailsPower-Tec Tie Rod Coupler 91164
LaserTie rod coupler to temporarily secure a broken tie rod. Useful for tow drivers, allowing wheel alignment to be briefly fixed allowing easier loadin...
View full detailsPower-Tec Tie Rod End Pliers 91165
LaserSocket end and pointed spindle end allow easy wheel pivoting for vehicle steering by temporarily re-connecting ball and socket tie rod ends.Saves t...
View full detailsPower-Tec Underbody Coating Gun 92609
LaserAir operated undercoating gun efficiently applies undercoating, supplied with 30cm soft hose for spraying into hard to reach areas.Air inlet: 1/4" ...
View full detailsPower-Tec Vario (Boron) Drill 8mm 91937
Laser1.0 / 5.0
0 Review
Tungsten carbide 3 point spot buster drill bit with multi-layered coating for super strength and boron steel.Size: 8mm x 44mm long.Boron Steel.3 po...
View full detailsPower-Tec Weld On Plate 5 x 25mm 91917
Laser1.0 / 5.0
0 Review
For use with Tack 'n' Pull, Part No. 91893, and a pulling system, these weld on plates are ideal for allowing hard to hold pulls.Size: 25 x 75mm.Pa...
View full detailsPower-Tec Weld On Plate 5 x 38mm 91918
Laser1.0 / 5.0
0 Review
For use with Tack 'n' Pull, Part No. 91893, and a pulling system, these weld on plates are ideal for allowing hard to hold pulls.Size: 38 x 75mm.Pa...
View full detailsPower-Tec Welding Clamp - C Shaped 91361
Laser1.0 / 5.0
0 Review
Extra wide and deep jaws to get over and around obstacles during body repair300mm reach.200mm wide.
Power-Tec Wrap Block - Loop 91493
Laser1.0 / 5.0
0 Review
Sanding block ideal for use on contoured bodywork and ridges. Loop faced.For use with 150mm diameter sanding discs.Wrap sanding disc around the blo...
View full detailsTool Connection 12mm Hex x 75mm S2 Bit 0723
Laser1.0 / 5.0
0 Review
Tool Connection 12mm Hex x 75mm S2 Bit 0723
Tool Connection 21mm Impact Socket 0332
Laser1.0 / 5.0
0 Review
Tool Connection 21mm Impact Socket 0332
Tool Connection Blue Female Bullet Terminal 4.0mm 100pc 35177
Laser1.0 / 5.0
0 Review
Blue Female Bullet TerminalCable Size 1.5mm2 to 2.5mm2Flared Entry Type100pc
Tool Connection Clear Solder Type Heat Shrink Butt Connector 100pc 30691
Laser1.0 / 5.0
0 Review
Clear Heat Shrink Butt ConnectorSolder-type | Shrink Ratio 2:1For cable 0.1 to 0.5mmAssorted box replacment code 37188.100pc
Tool Connection Clear Solder Type Heat Shrink Butt Connector 25pc 30690
Laser1.0 / 5.0
0 Review
Clear Heat Shrink Butt ConnectorSolder-type | Shrink Ratio 2:1For cable 0.1 to 0.5mmAssorted box replacment code 37188.25pc
Tool Connection Clic Type Re-usable Hose Clip 10.0-11.0mm 25pc 35261
Laser1.0 / 5.0
0 Review
Clic Type Hose ClipBand Width 7mm | 10mm to 11mm RangeManufactured from Chrome Nickel Steel25pc
Tool Connection Clic Type Re-usable Hose Clip 10.5-11.5mm 25pc 35262
Laser1.0 / 5.0
0 Review
Clic Type Hose ClipBand Width 7mm | 10.5mm to 11.5mm RangeManufactured from Chrome Nickel Steel25pc
Tool Connection Clic Type Re-usable Hose Clip 13.5-15.0mm 25pc 35264
Laser1.0 / 5.0
0 Review
Clic Type Hose ClipBand Width 8mm | 13.5mm to 15mm RangeManufactured from Chrome Nickel Steel25pc
Tool Connection Clic Type Re-usable Hose Clip 14.5-16.0mm 25pc 35265
Laser1.0 / 5.0
0 Review
Clic Type Hose ClipBand Width 8mm | 14.5mm to 16mm RangeManufactured from Chrome Nickel Steel25pc
Tool Connection Clic Type Re-usable Hose Clip 8.5-9.5mm 25pc 35260
Laser1.0 / 5.0
0 Review
Clic Type Hose ClipBand Width 7mm | 8.5mm to 9.5mm RangeManufactured from Chrome Nickel Steel25pc