On Orders Over £40
Power-Tec
Power-Tec Reverse Hinge Head 9.4mm 91141
Power-Tec1.0 / 5.0
0 Review
9.4mm reverse head for use with adjustable hinge handle for quickly and accurately fixing welded door hinge alignment problems. Even with door in p...
View full detailsPower-Tec Multi Clamp - 120mm 91127
Power-Tec1.0 / 5.0
0 Review
Double jaw clamp with a 3 tonne pull capacity (5 tonne when used in-line), can be used for any angle of pull all around the vehicle.120mm wide jaw....
View full detailsPower-Tec Double Grab Hook 91114
Power-TecUsed to join or shorten chains, suitable for bodywork and chassis pulling applications.Useful for shortening chains.Double hook allows the joining ...
View full detailsPower-Tec Monster Slide Kit 7.5KG 91121
Power-Tec1.0 / 5.0
0 Review
Heavy slide hammer weighing 7.5kg (16.5lb), supplied with a variety of attachments allowing for heavier repair work and controlled hammering, inclu...
View full detailsPower-Tec Floor Pull Plate 91108
Power-TecA floor plate puller with four chain fixing positions for bolting to the workshop floor, suitable for bodywork and chassis pulling applications.Siz...
View full detailsPower-Tec Self Lock Clamp - 60mm 91068
Power-Tec1.0 / 5.0
0 Review
60mm Self-locking clamp. Speed up pulls and save valuable hook-up time by eliminating the need to bolt the clamp to the panel.60mm wide jaw.6 tonne...
View full detailsPower-Tec Strut Puller 91106
Power-Tec1.0 / 5.0
0 Review
Easy, fast and reliable method of pulling MacPherson suspension strut towers to correct chassis dimensions to factory specifications.Developed to c...
View full detailsPower-Tec J Hook - 65mm 91105
Power-Tec1.0 / 5.0
0 Review
J shaped pull hook with a 6 tonne capacity, for use with body pulling equipment.65mm wide.Pull capacity: 5 tonne.Complete with eyelet for chain hoo...
View full detailsPower-Tec 5 x 25mm weld on plate aluminium 91100
Power-TecFor use with Tack 'n' Pull, Part No. 91893, and a pulling system, these weld on plates are ideal for allowing hard to hold pulls.Size: 25 x 75mm.Pa...
View full detailsPower-Tec 5 x 75mm weld on plate aluminium 91102
Power-Tec1.0 / 5.0
0 Review
For use with Tack 'n' Pull, Part No. 91893, and a pulling system, these weld on plates are ideal for allowing hard to hold pulls.Size: 75 x 75mm.Pa...
View full detailsPower-Tec Pull Strap - 1.2m 91092
Power-Tec1.0 / 5.0
0 Review
Excellent for general pulling. Webbing body straps avoid marking and causing additional damage, and can be used in a variety of pulling situations,...
View full detailsPower-Tec Right Angle Clamp - 40mm 91096
Power-Tec1.0 / 5.0
0 Review
Single jaw clamp with a 2 tonne pull capacity (3 tonne when used in-line), features a 40mm jaw and 2 pulling eyelets meaning that it can be used fo...
View full detailsPower-Tec Clamp - 45mm 91089
Power-Tec1.0 / 5.0
0 Review
Robust pull clamp featuring 45mm wide jaws and a 5 tonne pull capacity, for use with body pulling equipment.45mm wide jaw.5 tonne pull capacity.Com...
View full detailsPower-Tec Strap with protective sleeve - 2m 91091
Power-Tec1.0 / 5.0
0 Review
Designed for pulling and anchoring parts where access is limited.Circumference: 2m.Width: 25mm.Complete with 20cm protection sleeve.3 tonne breakin...
View full detailsPower-Tec Clamp - 100mm 91088
Power-Tec1.0 / 5.0
0 Review
Robust pull clamp featuring 100mm wide replaceable jaws and a 6 tonne pull capacity, for use with body pulling equipment.100mm wide jaw.6 tonne pul...
View full detailsPower-Tec Scissor Clamp - 50mm 91087
Power-Tec1.0 / 5.0
0 Review
Robust scissor clamp with 3 tonne pulling capacity and 50mm jaws.50mm wide jaw.3 tonne pulling capacity.Painted finish for protection.Manufactured ...
View full detailsPower-Tec Down Pulley 91069
Power-Tec1.0 / 5.0
0 Review
Compatible with jigs and pullers, this down pulley can be used to convert a direct pull into a downward pull.Converts a direct pull into a downward...
View full detailsPower-Tec Right Angle Clamp - 100mm 91071
Power-Tec1.0 / 5.0
0 Review
Single jaw clamp with a 6 tonne pull capacity, features 2 pulling eyelets meaning that it can be used for straight and right angle pulls.100mm wide...
View full detailsPower-Tec Pull Hook Set 91073
Power-Tec1.0 / 5.0
0 Review
A pull hook set with both small and large pull plates, and an adaptor for a 10 tonne body kit, for reaching over wide obstructions, making this ide...
View full detailsPower-Tec Panel & Image Profiler 91234
Power-Tec1.0 / 5.0
0 Review
An ideal tool for the professional bodyshop, this contour gauge is for duplicating profiles in preparation for repairing vehicle bodywork. It's als...
View full detailsPower-Tec Gluematic Glue Gun 91237
Power-TecHot melt glue gun with quick and easy glue stick feeder, for precision controlled glue application. Supplied with 3x glue sticks.Operating temperat...
View full detailsPower-Tec Parking Sensor Kit - 18.2mm, 18.4mm, 26mm 92471
Power-Tec1.0 / 5.0
0 Review
For fitting and replacing parking sensor holders to plastic bumpers.Contents include screw hole punches: 18.2mm, 18.4mm and 26mm.12 x attachment ai...
View full detailsPower-Tec PDR Pencil Punch 91233
Power-TecPaintless dent removal pencil punch, use to lightly knock down high spots without damaging paint.Knock down high spots following paintless dent rem...
View full detailsPower-Tec Midget Clamp - 35mm 91067
Power-TecThis Pulling Clamp from Power-TEC has a 35mm wide jaw and is small enough to be used in hard to reach, tight areas, yet it still boasts a 4 tonne p...
View full details